MXH6-10 MXH10-20 Double acting Fluid Air Non-lube 0.05Mpa to 0.15Mpa Cylinders
How to Mount a Workplece
Workpieces can be mounted on 2 surfaces of the compact slide.
Since the table is supported by the linear guide, take care not to ap-
ply strong impact or large moment, etc. when mounting workpieces.o Hold the table when fastening workpieces to it with bolts, etc. If thebody is held while tightening bolts, etc., the guide section will besubjected to a large moment, and there may be a loss of precision.
For connection with a load having an external support/guide mecha nism, select an appropriate connection method and perform carefulalignment.
Use caution, as scratches or nicks, etc. on the sliding parts of the piston rod can cause malfunction and air leakage.
A Caution
1. Do not place your fingers in the clearance between the non-ro-
tating plate and the cylinder tube. Your fingers could get caughtbetween the table and the cylinder tube when the piston rod re-tracts. If fingers are caught in a cylinder, there is a danger of in-jury due to the strong cylinder output, and therefore cautionmust be exercised.
2. In terms of the load mass and moment, the cylinder must be op-erated below the maximum load mass and allowable moment.
3. If the output of the compact slide is applied directly to the table,make sure it is applied along the rod axial line. (Refer to thefigure below.)
Specifications
| Bore size (mm) | 6 | 10 | 16 | 20 |
| Guide rail width (mm) | 5 | 7 | 9 | 12 |
| Fluid | Air |
| Action | Double acting |
| Piping port size | M5 x 0.8 |
| Minimum operating pressure | 0.15 MPa | 0.06 MPa | 0.05 MPa |
| Maximum operating pressure | 0.7 MPa |
| Proof pressure | 1.05 MPa |
| Ambient and fluid temperature | Without auto switch: –10 to 70°C (No freezing)
With auto switch: –10 to 60°C (No freezing) |
| Piston speed | 50 to 500 mm/s |
| Allowable kinetic energy (J) | 0.0125 | 0.025 | 0.05 | 0.1 |
| Lubrication | Non-lube |
| Cushion | Rubber bumper on both ends |
| Stroke length tolerance | + 1.0
0 |
Theoretical Output
Bore size
(mm) | Rod size
(mm) | Operating
direction | Piston area
(mm2) | Operating pressure (MPa) |
| 0.3 | 0.5 | 0.7 |
| 6 | 3 | OUT | 28.3 | 8.49 | 14.2 | 19.8 |
| IN | 21.2 | 6.36 | 10.6 | 14.8 |
| 10 | 4 | OUT | 78.5 | 23.6 | 39.3 | 55 |
| IN | 66 | 19.8 | 33 | 46.2 |
| 16 | 6 | OUT | 201 | 60.3 | 101 | 141 |
| IN | 172 | 51.6 | 86 | 121 |
| 20 | 8 | OUT | 314 | 94.2 | 157 | 220 |
| IN | 264 | 79.2 | 132 | 185 |
Mass
| Model | Stroke (mm) |
| 5 | 10 | 15 | 20 | 25 | 30 | 40 | 50 | 60 |
| MXH6 | 62 | 67 | 76 | 81 | 91 | 96 | 111 | 125 | 140 |
| MXH10 | 117 | 125 | 140 | 148 | 162 | 170 | 192 | 215 | 238 |
| MXH16 | 216 | 227 | 247 | 258 | 279 | 290 | 323 | 353 | 386 |
| MXH20 | 437 | 455 | 486 | 505 | 542 | 560 | 597 | 656 | 700 |
Dimensions
Delivery
1. If the products we have in store, we will send it out ASAP after payment.
2. If the products which were customized, we will complete the production within a specified period of time, and send it out the first time, we can promise it.
3. We have a variety of ways to deliver goods, usually DHL, Fedex, TNL will be normal ways, If you require use of a courier, we can do it.
4. Also we can send by your delivery acount if you want.
Products shopping guide
For example: you want to purchase a batch of cylinders but you don't know which type you are really want, so you can tell me all your requirement and I'll recommend to you.
Product Tags:
|
|
Double Acting Pneumatic Air Cylinders Non Lube 0.05mpa To 0.15mpa Mxh6-10 Mxh10-20 Images
|
